Hydraulic drum cutter excavator attachment for 5-50 ton EX200
What is a drum cutter used for?
A drum cutter is an attachment where rotating drums equipped with
picks, strategically positioned around the outer diameter, are
rotated by a hydraulic motor at several hundred revolutions per
minute to cut rock, concrete or frozen ground.
Milling excavators are divided into horizontal milling excavators
and vertical milling excavators. Widely used in open-pit coal mines
and tunnel excavation
Cutting and contour correction, channel trench milling, asphalt
concrete pavement milling, rock and frozen soil milling, tree roots
Various construction fields such as milling, steel industry,
forestry, etc,
Characteristics of longitudinal milling excavator
Application scope:
Concrete with a small amount of steel reinforcement, medium
hardness rock, weathered rock, gypsum, coal rock, iron slag, etc.
1. Low noise, low vibration.
2. Construction safety, high efficiency, small particles excavated
by milling, can be directly used as backfill material.
3. Flexible application, can replace different milling and
excavation cutterheads, trenching milling and excavation wheels,
and rocks according to the working environment
Saw discs, etc. Easy and convenient replacement.
| Model | Unit | DPAD200 | DPAD400 | DPAD600 | DPAD800 | DPAD1000 | DPAD1200 |
| SuitableEcavator | ton | 1~3 | 4~9 | 10~17 | 18~24 | 25~32 | 33~45 |
| MaximumInput Power | kW | 22 | 44 | 41 | 70 | 110 | 140 |
| Maximum How | Mmin | 650 | 1,000 | 1,320 | 3200 | 4,600 | 5,400 |
| Recommended Fow | Vmin | 400 | 800 | 1,200 | 2200 | 3,200 | 3,600 |
| Maximum Pressure | bar | 400 | 400 | 400 | 400 | 400 | 400 |
| Output Shaft Torque | bar | 3,750Nmg320 | 4.288Nma320 | 6320Nm@320 | 14272Nm@320 | 21,376Nma320 | 37830Nma350 |
| Pdk Force | bar | 21,8kNa320 | 24.9kNa320 | 26,6kNa320 | 44,2kNa320 | 63,2kNa320 | 104.1kNa350 |
| Output Shaft Speed | Mmin | 500rpmg40 | 95,0rpmg80 | 95,0rpmg120 | 780rpmg220 | 76,0rpm@320 | 53,0rpm@360 |
| Pd Speed | Vmin | 0,9m/s@40 | 1,7m/s@80 | 24m/sa120 | 2,2m/sa220 | 2,7m/sa320 | 20m/sa360 |
| UnitWeight | kg | 181 | 1925 | 595 | 1.17 | 1.444 | 2.458 |
| No.ofPdks | mm
Shank | 32(19,4) | 32(194) | 64(19,4 | 64(25,4) | 60(38/30) | 54(38/30) |
| Suit for Various models of excavator |
| YUCHAI | YC35YC50YC55YC60YC65YC85YC135YC230 |
| JCB | JS130JS210JS220JS290JS330 |
| HYUNDAI | R55R60R80R130LC35R200R2005R210R2157/9R2205R225LC7/9R290 |
| R290R290LC7R300LCR305LCR330LCR375R360LC7R450LC |
| CATERPILLAR | CA*T305.5CA*T306CA*T307CA*T308CA*T312CA*T315CA*T320CA*T323CA*T324 |
| CA*T325CA*T326CA*T330CA*T336CA*T345CA*T349CA*T365CA*T374CA*T390 |
| KOMATSU | PC45PC50PC55PC56PC60567PC608PC708PC78PC1003PC1206 |
| PC1307PC2007/8PC220PC270PC240PC3006/7PC360PC4006/7/8 PC4506 |
| PC6006PC6503PC650PC800PC1000PC1200PC1250 |
| ZXAIS/HITACAI | EX35EX40EX55EX60EX603ZX200ZX210ZX250ZX290ZX330ZX470EX1000EX1200 |
| EC | EC55EC60EC140BPEW145BPEW160BBEC210EC240 |
| EC290EC360LCEC380.EC460EC480EC700 |
| KOBELCO | SK35SK50SK60SK75SK100SK120SK200123456SK230SK250SK260SK280 |
| SK300SK330SK3306SK350SK400SK450SK480 |
| DOOSAN/DAEWOO | DH35DH55DH60DH55DH60DH80DH807DH80GOLDDH150 |
| DH200DH22035DH2805DX60DX200DX225DX260DH290DH360DH420DH500 |
| SUMITOMO | SH55SH60SH75SH50SH100SH120SH200 |
| SH20035SH22023SH280SH300SH350SH400SH450 |
| LIUGONG | CLG904CLG9055CLG906CLG907CLG9075CLG908CLG915CLG150 |
| CLG920CLG921CLG922CLG225CLG924CLG925CLG933CLG936CLG939 |
| CLG942 CLG948CLG950CLG952CLG200CLG205CLG220CLG225 |
| KUBOTA | KX135KX185KX155KX161KX163KX165KX183 |
| IHI | IHI35IHI50IHI60IHI55IHI80IHI100 |
| XCMG | XE55XE60XE65XE75XE80XE85XE135XE150XE155XE200XE205XE215 |
| XE225XE245XE270XE305XE335XE370XE380XE400XE470XE490 XE700 |
| YANMAR | ViO35ViO55ViO75 |
| cx | CX50CX55CX58CX75CX210CX240CX290CX330 |
| KATO | HD820HD1023HD1430HD2045HD700 |
| SANY | SY55SY60SY65SY70SY75SY85SY95SY115SY135SY155SY195SY200SY205SY215 |
| SY220SY225SY235SY245SY285SY305SY335SY365SY375 SY395SY415SY485 |
